GenTran KIT3026 Prewired Manual Transfer Switch Kit for 6-10 Circuits and Generators up to 7500-Watt
|
Go To Cheap Store for Check Price Now !!
Safest Way to Distribute Power Eliminates dangerous backfeeds and electrical overload...
Readmore
Technical Details
- Connects to existing load center like a subpanel. Never run a generator indoors! A 60-amp 2-pole main breaker is required in existing load center (not included)- Compatible with any portable generator up to 7500-Watt (continuous)
- Includes prewired transfer switch, power inlet box, 10-Foot cord, extra 20 amp plug
- Transfer Switch dimensions: 9.25 Width by 11.125 Height by 3.375 Depth
- UL Listed, Made in USA. Protected by US Patent 6,861,596 B2 and other patents pending
See more technical details
By Tall Brian (Michigan)
this item is a good value for the money since it comes with a power inlet box and a 10' power cord. My generator (ETQ TG32P12)needs this 30amp type power cord (4 pin locking L1430 connector)to be able to split the A and B lines associated with balancing the loads. The 20 amp power cords that come with other units will not split the A and B lines using my specific generator. The reason i didn't rate this a five star was the meters used to balance the loads are very primitive...i.e. marginally accurate...but that's ok...no one should expect precision. The real benefit to this type of transfer box is the flexibility to use mulitple configurations of circuit breakers....i.e. 3 20 amp with 3 15 amp breakers or 6 15 amp breakers or whatever....and it uses common circuit breakers. As a suggestion: I would consider adding more wiring through the conduit to the main box just in case you decide to expand the box to 7-10 circuits. I should have done that and didn't. Hope this helps.
Images Product
Check Price GenTran KIT3026 Prewired Manual Transfer Switch Kit for 6-10 Circuits and Generators up to 7500-Watt Now!!
